TRUNKLIFTS AVAILABLE FOR

FORD / CHEVY / GM / WILLYS 1928-1948

            

Manufactured by Mr.40's, our TRUNKLIFT KITS replace all manor of stay-up poles and worn-out stock hardware. TRUNKLIFTS will raise most trunklids after the latch is released, and then hold it in the highest possible position until you are ready to close it. Most kits are engineered to use the available stock holes with very little installation time required. All TRUNKLIFTS contain extension force gas struts designed to fit each application, custom made brackets, stainless steel Allen-Head hardware, ballstuds with nylocks and illustrated instructions. Some kits contain AVK industrial nutserts with stainless steel hardware for one-side surface mounting.


FORD TRUNKLIFT APPLICATIONS

                            
                    32FCTL                                32FGTL                                  36FCTL                                37FCTL
    Fits '28-'34 Ford Coupe       Fits '28-'34 Fiberglass        Fits '35-'36 Ford Coupe       Fits '37-'38 Ford Coupe
            & Roadsters               Ford Coupe & Roadster               Steel & Glass                                 $149.00 
                    $139.00                               $149.00                                   $149.00 

                          
                    40FCTL                               48FCTL                                   37FSTL                                40FSTL
         Fits '39-'40 Ford             Fits '42-'48 Ford & Merc            Fits '37-'38 Ford                  Fits '39-'48 Ford 
          & Merc Coupe                 Coupe & Convertible                      Sedan                                  Sedan
                                         $139.00                               $139.00                                  $149.00                               $149.00

                                             
                  40FCVTL                                                  #41FCTL 
   Fits '40 Ford Convertible              Fits '41 Ford Coupe (not pictured)
               $139.00                                                     $139.00

                  CHEVY / GM / WILLYS TRUNKLIFT APPLICATIONS

           
                     38CCTL                                 39CCTL                                40CCTL                                 48CCTL
       Fits '37-'38 Chevy/GM             Fits '39 Chevy/GM               Fits '40 Chevy/GM             Fits '41-'48 Chevy/GM
         Coupe & Business                        Coupe                                   Coupe                                   Coupe
                  $139.00                                 $139.00                                 $139.00                                 $149.00


                      
                   38CSTL                                  40CSTL                                48CSTL                                 40WCTL
       Fits '37-'39 Chevy/GM             Fits '40 Chevy/GM             Fits '41-'48 Chevy/GM             Fits '39-'41 Willys
                  Sedan                                     Sedan                                   Sedan                                    Coupe
                $149.00                                   $109.00                                 $149.00                                  $149.00

Other custom kits available, call for details.

REPLACEMENT STRUTS...$79.00 per pair.
Yes we've been making TRUNKLIFT KITS since 1985 now and some of the older ones are starting to get droopy. You can bring your decklid up to snuff with a new pair of gas shocks. Call us with your make and model car and we will do the rest. All pairs are $79.00 plus shipping and handling. Struts include new nylon ball sockets. 
 

 

'HOODLIFT KITS' '39-'40 Fords
Raises the hood on '39 Deluxe and all '40 model Fords, plus our newest kit now for '40 and '41 Ford pickups. Very easy to mount with clear instructions. Gas springs clear most A/C and heater hoses. Some hood hinge adjustment may be necessary for proper hood alignment.



#40HLP
'39 DELUXE & '40 FORD 
$139.00

#40HLPK
 '40-'41 FORD PICKUP PASSENGER HOOD LIFT KIT
$119.00



REPLACEMENT STRUTS...$79.00 per pair.
You can bring your hoodlift up to snuff with a new pair of gas shocks. Call us with your make and model car and we will do the rest. All pairs are $79.00 plus shipping and handling. Struts include new nylon ball sockets. 


                                      
 

GRILL SHROUDS for '40 FORDS
Our 18 gauge aluminum, steel or stainless steel over-the-grill shrouds perform double duty on 1940 Fords and '39 Deluxe Fords by hiding the clutter, plus help direct incoming air through the radiator and not over it. Grille shrouds help your '40 run cooler, and make your engine compartment look a whole lot better with the hood up. Comes undrilled so mounting method can be of your choice. Available with hole cut out for stock latch assembly or solid for mounting an aftermarket latch or as a pass-thru piece. Aluminum, steel, or stainless steel for either Standard or Deluxe Grill Models.

Grill Shrouds for '40 Ford Standard, '40-'41 Pickups & '39 Deluxe Passenger 

 

 

 

 

    #40GSS-ANH, GRILL SHROUD STANDARD - ALUMINUM NO HOLE.......................................................$79.00


#40GSS-AWH, GRILL SHROUD STANDARD - ALUMINUM with STOCK LATCH HOLE............................$79.00

#40GSS-SNH, GRILL SHROUD STANDARD - STEEL NO HOLE.................................................................$89.00

#40GSS-SWH, GRILL SHROUD STANDARD - STEEL with STOCK LATCH HOLE....................................$89.00

#40GSS-SSNH, GRILL SHROUD STANDARD - STAINLESS STEEL NO HOLE........................................$109.00

#40GSS-SSWH, GRILL SHROUD STANDARD - STAINLESS STEEL with STOCK LATCH HOLE..........$109.00

Grill Shrouds for 1940 Ford Deluxe Models

#40GSD-ANH, GRILL SHROUD DELUXE - ALUMINUM NO HOLE..............................................................$79.00

#40GSD-AWH, GRILL SHROUD DELUXE - ALUMINUM with LATCH HOLE..............................................$79.00

#40GSD-SNH, GRILL SHROUD DELUXE - STEEL NO HOLE......................................................................$89.00

#40GSD-SWH, GRILL SHROUD DELUXE - STEEL with LATCH HOLE......................................................$89.00


#40GSD-SSNH, GRILL SHROUD DELUXE - STAINLESS STEEL NO HOLE...........................................$109.00


#40GSD-SSWH, GRILL SHROUD DELUXE - STAINLESS STEEL with LATCH HOLE...........................$109.00

 

'39-'40 FORD FENDER PANELS
We made 'em look cool... and that's the job they do by allowing the engine heat to exit and your ride to run cooler. Functional 3" Louvers are arranged so they actually scavenge the hot air out past the fender wells. Laser-cut out of heavy 16 gauge steel these panels will put strength back in your Fords front clip. These flat-style panels have all the right curves as well as oval-shaped mounting holes to make hanging and adjusting your front clip a little easier. Sale price is for pairs only. Mr.40's logo is laser-cut in each panel for copyright reasons.

 
         40SIPM - SMOOTH INNER PANELS MUSTANG II        40LIPM - LOUVERED INNER FENDER PANELS MUSTANG II
   Fits stock '40 & aftermarket chassis with Mustang II suspensions
  $289.00 pair                                                                    $329.00 pair

 
 40SIP - SMOOTH INNER FENDER PANELS AXLE OR IFS    40LIP - LOUVERED INNER FENDER PANELS AXLE OR IFS
Fits stock '40 chassis with axle front suspension, will also fit aftermarket chassis with IFS if 
you cut out the section to clear the "A" arms with a plasma cutter or nibbler. 
$289.00 pair                                                                   $329.00 pair

         
 #40LIP-SC - LOUVERED INNER FENDER PANELS-SUPER COOLERS
(94 TOTAL LOUVERS)
$399.00 pair

 
Fender Panel Mounting Bracket Kits
Removing the stock front yoke on your Ford means stabalizing the front clip in other ways. These 1/8" thick steel bracket kits allow you to mount fender panels to adjacent frame rail for added front support and vibration reduction. All kits come with USA made stainless steel button head Allen bolts and Nylocks.

                          

# 40FPK-S (Straight Brackets, Side Framerail Mount).........................$34.00

# 40FPK-L ("L"-Shapes, Top Framerail Mount)...................................$34.00

'40 Ford Body Bolt Kits
Eliminate those ugly stock bolt sets with these USA made stainless steel button head allen bolts and nylock nut kits. Our kits attach the 40 Ford front fenders/grill/inner panels together, with separate kits for running boards and rear fenders.

# 40 LBK, '40 Ford Frontend Clip Kit (16pcs).................................................$26.90

# 40 LBK-FF/COWL, '40 Ford Front Fender to Cowl Kit (8pcs)....................$14.90

# 40 LBK-RB, '40 Ford Running Board Kit (22pcs)........................................$31.90

# 40 LBK-RF-PASS, '40 Ford Rear Fender Kit (20pcs)..................................$24.90

# 40 LBK-RF-PKP, '40 Ford Pickup Rear Fender Kit (14pcs)........................$20.90

# 40 LBK-ALL-PASS, '40 Ford Coupe/Sedan Complete Kit (66pcs)............$85.90

# 40 LBK-ALL-PKP, '40 Ford Pickup Complete Kit (60pcs)..........................$85.90 

 

 

 

 

 

 UNDER-FENDER BATTERY BOX KIT
Finally a battery location that is out-of-sight, close to the motor and easily accessible. The unused space tucked into the right side fender is perfect for our newest battery boxes. We know they work on '35 to '48 Ford frames cause we've run 'em there for years. They'll probably work in lots of other fat fendered cars too!

Laser-cut from 18ga. stainless steel, this box measures 10-1/8 x 7" x 7" and uses 14" of frame rail space. Kit comes with AVK industrial nutserts with stainless steel Allen head hardware and mounting tool for boxed or open frames.

Battery location means you can use shorter cables thus increasing voltage to your engine over trunk mount batteries.

Removing the splash guard and reinforcing the fender may be neccessary. No hold down or battery strap needed...fender location keeps the battery from escaping the box.   

 

 

 

 

#40FBB-SS, Frame Mount Battery Box Stainless Steel..................$109.00 

 

 

 

 

  

ELECTRIC COWL VENT KIT
This kit is designed to allow use of your cowl vent when the handle space has been consumed by A/C, stereo & other underdash intrusions. Designed to bolt-in to most any cowl, the kit comes with firewall mounting bracket attached, (2) cowl vent control brackets, 12 volt US made motor, gear drive, stainless steel hardware, wiring, momentary pushbutton switch and illustrated instructions. Motor stops at any desired height and closes to seal as tight as originally set-up. Do yourself a "FRESH-AIR-FAVOR." 

 

 

 

#40ECV, Electric Cowl Vent Kit
$159.90

Measures 4" wide, 3" high & 3" deep.

 

 

      

   WINDSHIELD "THANGS" FOR '40's
We don't have a clue what Henry called them...we do know most everybody with our V-Butted windshields needs to cover the gap in the garnish molding where it comes together in the center above the dash. We tooled up and reproduced the part that came originally on '40 pickups at the top of the windshield. Removing the center divider bar leaves a big ugly hole and now you can cover it up.

#40VBT '40 V-Butt Thang...........$15.00