12927 E. Ashcroft Avenue
Sanger, CA 93657
Phone: 559 875-1222
Fax: 559 875-1222
Email: mr40sfatstuff@aol.com
Toll-free Phone/Fax
1-800-33-Mr 40s (1-800-336-7407)
CABLES AND LATCHES #40HTC...$39.90 SINGLE LEVER CABLE
#40AVK1420, 1/4" nutserts $hardware......................$14.90
HOOD & TRUNK CABLE
For use with inside hood and trunk latch setups. Made in U.S.A. with steel inner cable & billet aluminum knob that will pull or push. 72 inches long, you trim to fit your project.
Billet aluminum handle, 10 foot adjustable length solid stainless push-pull cable, complete with stop collar mounting clips. Perfect for opening hood or trunk.
#40SLC...$69.90
#40DLC (DUEL LEVER CABLE)...$99.00
EMERGENCY BRAKE CABLE KITS
With a Ford or GM drum brake rearend in your street rod, our newest E-Brake cable system will connect to your stock or aftermarket E-Brake handle under the dash or on the floor clear back to the rear brakes. These High-Quality automotive cables and connectors mount along the left side frame rail to unclutter the center section of the chassis. The 3-Bracket adjustable mount makes fine tuning your E-Brake cables a breeze. Available for both Disc and Drum Brake Systems.
#40EBS Emergency Brake Cable System.................................................$149.90
#40EBS-D Emergency Brake Cable System - Disc....................................$159.90
BOX FRAME & FIBERGLASS HARDWARE KIT
This AVK Industrial Nutsert Kit makes mounting hardware to surfaces where you can't get a wrench or nut on the other side a breeze. Threaded Brass Nutserts keep their thread integrity after they are cinched into place using the tool provided. These Nutserts are used primarily on aircraft and are perfect for mounting parts to box frames and fiberglass projects where all you have is a hole to work with. Kit comes with 4 threaded brass nutserts, 4 stainless steel button head allens, mounting tool and instructions. 
#40AVK516, 5/16" nutserts & hardware.......................$14.90
STEREO SYSTEMS FOR '40-'48 FORDS
Stereo systems to fill your '40 with Super Sounds! No cutting or filing of the stock '40 opening is necessary...just bolt the system into place. Clears all stock wipers and cowl vent hardware. Most customers using the remote CD disc player mount it in the trunk area. Manufactured by Customautosound these units really deliver the sound without cutting into your dash. The Ford Logo looks great and these units have all the functions you need. Also avaiable for '46-'48 Fords...no cutting!
#40S-CD, AM/FM Stereo, usb, cdc (cd control), electronic tuning, seperate bass & treble control, fader, rca pre-outs, chrome nose, auxiliary input, 240 watts. Manufactured by Customautosound part number
USA-630...........................................269.00
#40S-CD10, USA-630 with 10 disc CD changer.....................................$499.00
#40SA-CD, AM/FM Stereo, CD changer controller, seperate bass & treble control, 4-way fader, digital clock, duel rca pre-outs (front & rear), 30 pre-sets 12AM & 18FM, 200watts 4x50.....................$309.00 #40SA-CD10, Secretaudio System with 10 disc CD changer ..............................................$539.00
"SECRETAUDIO"
Hideaway 200 Watt AM/FM CD Controller featuring 'RF' (radio frequency) remote control. For those of you who have an original or altered dash you may want to consider this unit that you control with a remote. LCD display unit can be mounted almost anywhere and controlled by wireless remote from up to 40 feet away. Mount the tuner/amplifier under the seat or dash.
CD CHANGER
#40CDCH, 10 disc CD changer for above units....................................$279.00
SPEAKERS & COMPONENTS
DASH GRILLE SPEAKERS
Two 3-1/2" dual cone cobalt magnet speakers mount behind the stock '40 Ford chrome dash grill piece. No drilling. Sounds are much clearer than any door or kickpanel mounted speakers.
#40SSF, '40 Ford Radio Grille Dual Speakers......................................................$69.90
# 40KPS-Pkp '40-'46 Ford Pickups (pair)................................$149.00 Call Mr.40's for price quote on flahead, small block and big block designs with or without a fan, shroud or tranny cooler. ALUMINUM RADIATOR & FAN FOR '39-'40 FORDS #40ARF, '40 Ford Aluminum Radiator with Fan, Small or Big Block....$750.00
REAR SPEAKERS
Rear package tray 6X9 combo speakers are quality units that really plush out the system with great bass tones.
# 40SSR Rear Tray 6X9 Speakers .................$89.90
KICKPANEL SPEAKERS
Kickpanel Speaker Kits '39-'40 Fords & '40 to '46 Pickups Molded in black ABS for an exact fit. Our panels include 6.5" 80 watt Co-Axial Speakers for quality Mid & Bass tones. Your upholstery attaches to these panels.
# 40KPS-Pass '39-'40 Ford Coupes, Sedans (pair)................$149.00
HIDDEN STEREO ANTENNA
Hidden electronic antenna gets great reception without the exterior uglies. This one works the best of all the electronic antennas we've tried. Velcro mount to headliner.
# 40HSA Hidden Electronic Antenna...................$29.90
BRASS & COPPER RADIATOR FOR '39-'48 FORDS
THE BRASSWORKS has been making top-qulity copper & brass radiators for over 30 years. Radiators are made with .750 x .110 seamless tubes in 3 & 4 row designs, silver soldered hose connections, pressure tested and painted with non-insulative black enamel. Top outlets measure 1-1/2" diameter,
Lower outlets measure 1-3/4".
Manufactured by Saldana Racing Products these high-quality aluminum radiators solve all your cooling problems. Saldana aluminum radiator cores are oven brazed and never use epoxy. These radiators can be built as a single, double, or triple pass for maximum efficiency. Available with a fan or shroud or both these radiators cool even the most stubborn engines. Call Mr40s to order and be sure to check out www.saldanaracingproducts.com for more cool products available here from Mr40s. 
#40AR, '40 Ford Aluminum Radiator, Small or Big Block ....................$550.00
FLOWKOOLER HIGH-PERFORMANCE WATER PUMPS
These high-quality water pumps provide cooling improvement through increased pump pressure from 1 PSI to 5 PSI, and when used in conjunction with FLOWKOOLER hi-flow thermostats they increase coolant flow from 68 gallons per minute to 100 GPM! These pumps reduce operating temps by 15 to 30 degrees, increase coolant flow by 30%, eliminate steam pockets in engine blocks & heads, reduce cavitation and stop engine ping. Made with new casting and components, ball and roller bearings and sintered iron seals.
#1888 Cast Aluminum fits 1955-1972 Chevy/Gm Motors 283ci. - 400ci. Short with 5/8" pilot without cam stop boss................$129.00
HIGH FLOW THERMOSTATS by ROBERT SHAW
The only way to flow! These US made high-performance thermostats have much larger windows so more coolant flows after opening. All brass and copper construction with a "balanced sleeve", don't choke your system with a cheapie.
#40HFT-160, 160 degrees.............................................$17.99
#40HFT-180, 180 degrees.............................................$17.99
RADIATOR HOSES FOR '39-'40 FORDS
These high-quality USA made molded hoses make the installation of smallblock Chevys in '39-'40 Fords a breeze. The bends and angles are correct when the top tank outlet is on the left or center. No more ugly flex hoses that slow the coolant down.
#40RHL...$39.90 #40RHU-C...$29.90 #40RHU-L...$27.90
LOWER RIGHT OUTLET 1-3/4" UPPER CENTER OUTLET 1-1/2" UPPER LEFT OUTLET 1-1/2"
Glass Kits '35-'48 Ford Coupes........................$299.00 Glass Kits '35-'48 Ford Tudors.........................$399.00 Glass Kits '35-'48 Ford 4-Doors........................$479.00 Glass Kits '35-'48 Ford Pickups........................$249.00 Glass Kits '35-'48 Ford Deliveries.....................$329.00 Glass Kits '35-'48 Ford Convertibles................$279.00
GLASS WINDOW KITS FOR '35-'48 FORDS
Using original glass patterns, our glass kits contain all the right pieces to refit any '35-'48 Ford. Available in factory tint, clear, light grey, or light bronze. Windshields come only in factory AS1 tint. If you've chopped the top, removed the vent windows, made other changes or have a year not listed, call us and we'll tell you what we need to make your glass.
# 35WSGC '25-'39 Ford..........................................$199.00
# 40WSGC '40 Ford Closed....................................$229.00
# 40WSGO '40 Convertible & Woody......................$229.00
# 48WSGC '41-'48 Ford..........................................$229.00
# 40DGK-CPE '40 Ford Coupe, 4-Dr, Delivery.......$129.00 # 40DGK-TDR '40 Tudor Sedan............................$139.00 '40 FORD ONE PIECE DOOR GLASS...............$89.00 each.
ONE PIECE DOOR GLASS CHANNEL CONVERSION KIT for '40 FORD
Convert you '40 door glass to the '39 style single. No more wind wings to whistle or leak. Every thing you need to convert bare doors to one piece glass. No other channel kits necessary. Kit comes with cloth & lower support channels, spacers, hardware and illustrated instructions. Specify one piece door glass when ordering above glass kits.
# 40VBK '40 Fords & '41 Commercials.........................$299.00 # 40VBK '41-'48 Ford Closed Cars ..............................$329.00 # 40VBK-GM '37-'48 Chevy & GM Cars.......................$329.00
V-BUTT WINDSHIELDSFOR '40-'48 FORD & '37-'48 CHEVY & GM
Our V-Butt windshield features an angle-ground center seam for the thinnest joint possible. Includes new easy to use rubber seal. Instructions plus a reprint of our Street Rodder article for the self-installer. Available in Certified AS-1 tint only.
'40 FORD V-BUTT WINDSHIELD SEAL
This is the same seal included in our V-Butt windshield kit. Designed to seal tightly against windshield frames this moulded rubber seal makes mounting a new V-Butt windshield a lot easier.
#40VBS..........................................$79.00 (specify year, make of vehicle)
BORGESON STEERING COMPONENTS Borgeson Part #908052, 30" Polished Stainless Steel Economy Steering Column, Traditional Style (no wiring access for horn or signal)......$189.00
Borgeson Part #013464, Steel Single Needle Bearing Universal Joint, 3/4"-36 spline X 3/4" smooth......$95.80
Borgeson Part #804006, '40 Ford Style Polished Gloss Black, 2-Spoke, 15" Steering Wheel, fits Borgeson Traditional Style Steering Columns......$445.41
Borgeson Part #908042, 30" Brushed Stainless Steel Economy Steering Column, Traditional Style (no wiring access for horn or signal)......$169.00
*If you're rebuilding a 1940 Ford and are concerned with what length of steering column to go with, Mr40s recommends installing a 30" Long Borgeson Steering Column.
Borgeson Part #920010, Saginaw 525, 3/4-30 Input Spline Steering Box......$333.79
For U-Joints, Steering Columns, Shafts, Boxes, Pumps and much more Borgeson is the Manufacturer of choice. You can order all your Borgeson items here from Mr40s, just click on the link, find your part numbers and include them with your Mr40s order and we will ship it factory direct to you. If you need help with finding the right spline shaft, u-joint etc. call Mr40s and we will walk you through it.
Total Cost Involved has been making the finest quality chassis, frame & suspension equipment for over 30 years and comes highly recomended from Mr40s and its customer base. For info, pricing, ordering and shipping info on chassis or parts for your project, call Mr40s or click on TCI's website link below.
CHASSIS by TCI
#104-1230-01, '35-'40 FORD IFS BASE CHASSIS
DAVE BELL PRINTS
Dave Bell, premier cartoonist from the pages of Street Rodder Magazine, created the caricatures for the 40's 50th birthday. Printed black on heavy 12" x 16" artpaper and suitable for mounting.
40DBP-C.............$6.00 #40DBP-CV.........$6.00 #40DBP-S............$6.00
#40DBP-ALL, (all 3 prints).....................$15.90
'40 FORD BUILDING TIPS
If you're putting together a '39-'40 Ford and want some helpful building tips, refer to our previously published articles from the pages of "Street Rodder" & "Street Rod Builder" Magazines in the issues listed below...
Installing TRUNKLIFT Kits, Street Rodder January '89
V-Butt Windshields, Street Rodder Spring '89
Cooling the '40, Street Rodder September '90
Installing '40 Front Sheet Metal, Street Rodder February '96
Installing Mr40s Wiper Kit, Street Rod Builder January '04
Article reprints are available from Mr40s for $5.00 each, (not available through e-mail).
